You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

823 lines
32 KiB

# -------------------------------------------------------------------------------------------------
# Copyright (c) 2010-2016 zsh-syntax-highlighting contributors
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification, are permitted
# provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice, this list of conditions
# and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright notice, this list of
# conditions and the following disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
# may be used to endorse or promote products derived from this software without specific prior
# written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# -------------------------------------------------------------------------------------------------
# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
# vim: ft=zsh sw=2 ts=2 et
# -------------------------------------------------------------------------------------------------
typeset -gA __hsmw_highlight_main__command_type_cache
# Define default styles.
typeset -gA HSMW_HIGHLIGHT_STYLES
: ${HSMW_HIGHLIGHT_STYLES[default]:=none}
: ${HSMW_HIGHLIGHT_STYLES[unknown-token]:=fg=red,bold}
: ${HSMW_HIGHLIGHT_STYLES[reserved-word]:=fg=yellow}
: ${HSMW_HIGHLIGHT_STYLES[alias]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[suffix-alias]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[builtin]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[function]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[command]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[precommand]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[commandseparator]:=none}
: ${HSMW_HIGHLIGHT_STYLES[hashed-command]:=fg=green}
: ${HSMW_HIGHLIGHT_STYLES[path]:=fg=magenta}
: ${HSMW_HIGHLIGHT_STYLES[path_pathseparator]:=}
: ${HSMW_HIGHLIGHT_STYLES[path_prefix]:=fg=magenta}
: ${HSMW_HIGHLIGHT_STYLES[path_prefix_pathseparator]:=}
: ${HSMW_HIGHLIGHT_STYLES[globbing]:=fg=blue,bold}
: ${HSMW_HIGHLIGHT_STYLES[history-expansion]:=fg=blue,bold}
: ${HSMW_HIGHLIGHT_STYLES[single-hyphen-option]:=none}
: ${HSMW_HIGHLIGHT_STYLES[double-hyphen-option]:=none}
: ${HSMW_HIGHLIGHT_STYLES[back-quoted-argument]:=none}
: ${HSMW_HIGHLIGHT_STYLES[single-quoted-argument]:=fg=yellow}
: ${HSMW_HIGHLIGHT_STYLES[double-quoted-argument]:=fg=yellow}
: ${HSMW_HIGHLIGHT_STYLES[dollar-quoted-argument]:=fg=yellow}
: ${HSMW_HIGHLIGHT_STYLES[dollar-double-quoted-argument]:=fg=cyan}
: ${HSMW_HIGHLIGHT_STYLES[back-double-quoted-argument]:=fg=cyan}
: ${HSMW_HIGHLIGHT_STYLES[back-dollar-quoted-argument]:=fg=cyan}
: ${HSMW_HIGHLIGHT_STYLES[assign]:=none}
: ${HSMW_HIGHLIGHT_STYLES[redirection]:=none}
: ${HSMW_HIGHLIGHT_STYLES[comment]:=fg=black,bold}
# Get the type of a command.
#
# Uses the zsh/parameter module if available to avoid forks, and a
# wrapper around 'type -w' as fallback.
#
# Takes a single argument.
#
# The result will be stored in REPLY.
-hsmw-highlight-main-type() {
if (( $+__hsmw_highlight_main__command_type_cache )); then
REPLY=$__hsmw_highlight_main__command_type_cache[(e)$1]
if [[ -n "$REPLY" ]]; then
return
fi
fi
if (( $#options_to_set )); then
setopt localoptions $options_to_set;
fi
unset REPLY
if zmodload -e zsh/parameter; then
if (( $+aliases[(e)$1] )); then
REPLY=alias
elif (( $+saliases[(e)${1##*.}] )); then
REPLY='suffix alias'
elif (( $reswords[(Ie)$1] )); then
REPLY=reserved
elif (( $+functions[(e)$1] )); then
REPLY=function
elif (( $+builtins[(e)$1] )); then
REPLY=builtin
elif (( $+commands[(e)$1] )); then
REPLY=command
# zsh 5.2 and older have a bug whereby running 'type -w ./sudo' implicitly
# runs 'hash ./sudo=/usr/local/bin/./sudo' (assuming /usr/local/bin/sudo
# exists and is in $PATH). Avoid triggering the bug, at the expense of
# falling through to the $(x) below, incurring a fork. (Issue #354.)
#
# The second disjunct mimics the isrelative() C call from the zsh bug.
elif { [[ $1 != */* ]] || is-at-least 5.3 } &&
! builtin type -w -- $1 >/dev/null 2>&1; then
REPLY=none
fi
fi
if ! (( $+REPLY )); then
REPLY="${$(LC_ALL=C builtin type -w -- $1 2>/dev/null)#*: }"
fi
if (( $+__hsmw_highlight_main__command_type_cache )); then
__hsmw_highlight_main__command_type_cache[(e)$1]=$REPLY
fi
}
# Check whether the first argument is a redirection operator token.
# Report result via the exit code.
-hsmw-highlight-is-redirection() {
# A redirection operator token:
# - starts with an optional single-digit number;
# - then, has a '<' or '>' character;
# - is not a process substitution [<(...) or >(...)].
[[ $1 == (<0-9>|)(\<|\>)* ]] && [[ $1 != (\<|\>)$'\x28'* ]]
}
# Resolve alias.
#
# Takes a single argument.
#
# The result will be stored in REPLY.
-hsmw-highlight-resolve-alias() {
if zmodload -e zsh/parameter; then
REPLY=${aliases[$arg]}
else
REPLY="${"$(alias -- $arg)"#*=}"
fi
}
# Check that the top of $braces_stack has the expected value. If it does, set
# the style according to $2; otherwise, set style=unknown-token.
#
# $1: character expected to be at the top of $braces_stack
# $2: assignment to execute it if matches
-hsmw-highlight-stack-pop() {
if [[ $braces_stack[1] == $1 ]]; then
braces_stack=${braces_stack:1}
eval "$2"
else
style=unknown-token
fi
}
# Main syntax highlighting function.
-hsmw-highlight-process()
{
## Before we even 'emulate -L', we must test a few options that would reset.
if [[ -o interactive_comments ]]; then
local interactive_comments= # set to empty
fi
if [[ -o ignore_braces ]] || eval '[[ -o ignore_close_braces ]] 2>/dev/null'; then
local right_brace_is_recognised_everywhere=false
else
local right_brace_is_recognised_everywhere=true
fi
if [[ -o path_dirs ]]; then
integer path_dirs_was_set=1
else
integer path_dirs_was_set=0
fi
if [[ -o multi_func_def ]]; then
integer multi_func_def=1
else
integer multi_func_def=0
fi
emulate -L zsh
setopt localoptions extendedglob bareglobqual
## Variable declarations and initializations
local start_pos=0 end_pos highlight_glob=true arg style
local in_array_assignment=false # true between 'a=(' and the matching ')'
typeset -a __HSMW_HIGHLIGHT_TOKENS_COMMANDSEPARATOR
typeset -a __HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS
typeset -a __HSMW_HIGHLIGHT_TOKENS_CONTROL_FLOW
local -a options_to_set # used in callees
local buf="$1"
integer len="${#buf}"
integer pure_buf_len=len # historical, was $#BUFFER, i.e. len without $PREBUFFER; used e.g. in *_check_path
local braces_stack # "R" for round, "Q" for square, "Y" for curly
if (( path_dirs_was_set )); then
options_to_set+=( PATH_DIRS )
fi
unset path_dirs_was_set
__HSMW_HIGHLIGHT_TOKENS_COMMANDSEPARATOR=(
'|' '||' ';' '&' '&&'
'|&'
'&!' '&|'
# ### 'case' syntax, but followed by a pattern, not by a command
# ';;' ';&' ';|'
)
__HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS=(
'builtin' 'command' 'exec' 'nocorrect' 'noglob'
'pkexec' # immune to #121 because it's usually not passed --option flags
)
# Tokens that, at (naively-determined) "command position", are followed by
# a de jure command position. All of these are reserved words.
__HSMW_HIGHLIGHT_TOKENS_CONTROL_FLOW=(
$'\x7b' # block
$'\x28' # subshell
'()' # anonymous function
'while'
'until'
'if'
'then'
'elif'
'else'
'do'
'time'
'coproc'
'!' # reserved word; unrelated to $histchars[1]
)
local -a match mbegin mend
# State machine
#
# The states are:
# - :start: Command word
# - :sudo_opt: A leading-dash option to sudo (such as "-u" or "-i")
# - :sudo_arg: The argument to a sudo leading-dash option that takes one,
# when given as a separate word; i.e., "foo" in "-u foo" (two
# words) but not in "-ufoo" (one word).
# - :regular: "Not a command word", and command delimiters are permitted.
# Mainly used to detect premature termination of commands.
# - :always: The word 'always' in the «{ foo } always { bar }» syntax.
#
# When the kind of a word is not yet known, $this_word / $next_word may contain
# multiple states. For example, after "sudo -i", the next word may be either
# another --flag or a command name, hence the state would include both :start:
# and :sudo_opt:.
#
# The tokens are always added with both leading and trailing colons to serve as
# word delimiters (an improvised array); [[ $x == *:foo:* ]] and x=${x//:foo:/}
# will DTRT regardless of how many elements or repetitions $x has..
#
# Handling of redirections: upon seeing a redirection token, we must stall
# the current state --- that is, the value of $this_word --- for two iterations
# (one for the redirection operator, one for the word following it representing
# the redirection target). Therefore, we set $in_redirection to 2 upon seeing a
# redirection operator, decrement it each iteration, and stall the current state
# when it is non-zero. Thus, upon reaching the next word (the one that follows
# the redirection operator and target), $this_word will still contain values
# appropriate for the word immediately following the word that preceded the
# redirection operator.
#
# The "the previous word was a redirection operator" state is not communicated
# to the next iteration via $next_word/$this_word as usual, but via
# $in_redirection. The value of $next_word from the iteration that processed
# the operator is discarded.
#
local this_word=':start:' next_word
integer in_redirection
# Processing buffer
local proc_buf="$buf"
for arg in ${interactive_comments-${(z)buf}} \
${interactive_comments+${(zZ+c+)buf}}; do
# Initialize $next_word.
if (( in_redirection )); then
(( --in_redirection ))
fi
if (( in_redirection == 0 )); then
# Initialize $next_word to its default value.
next_word=':regular:'
else
# Stall $next_word.
fi
# Initialize per-"simple command" [zshmisc(1)] variables:
#
# $already_added (see next paragraph)
# $style how to highlight $arg
# $in_array_assignment boolean flag for "between '(' and ')' of array assignment"
# $highlight_glob boolean flag for "'noglob' is in effect"
#
# $already_added is set to 1 to disable adding an entry to region_highlight
# for this iteration. Currently, that is done for "" and $'' strings,
# which add the entry early so escape sequences within the string override
# the string's color.
integer already_added=0
style=unknown-token
if [[ $this_word == *':start:'* ]]; then
in_array_assignment=false
if [[ $arg == 'noglob' ]]; then
highlight_glob=false
fi
fi
# Compute the new $start_pos and $end_pos, skipping over whitespace in $buf.
if [[ $arg == ';' ]] ; then
# We're looking for either a semicolon or a newline, whichever comes
# first. Both of these are rendered as a ";" (SEPER) by the ${(z)..}
# flag.
#
# We can't use the (Z+n+) flag because that elides the end-of-command
# token altogether, so 'echo foo\necho bar' (two commands) becomes
# indistinguishable from 'echo foo echo bar' (one command with three
# words for arguments).
local needle=$'[;\n]'
integer offset=$(( ${proc_buf[(i)$needle]} - 1 ))
(( start_pos += offset ))
(( end_pos = start_pos + $#arg ))
else
# The line was:
#
# integer offset=$(((len-start_pos)-${#${proc_buf##([[:space:]]|\\[[:space:]])#}}))
#
# - len-start_pos is length of current proc_buf; basically: initial length minus where
# we are, and proc_buf is chopped to the "where we are" (compare the "previous value
# of start_pos" below, and the len-(start_pos-offset) = len-start_pos+offset)
# - what's after main minus sign is: length of proc_buf without spaces at the beginning
# - so what the line actually did, was computing length of the spaces!
# - this can be done via (#b) flag, like below
if [[ "$proc_buf" = (#b)(#s)(([[:space:]]|\\[[:space:]])##)* ]]; then
# The first, outer parenthesis
integer offset="${#match[1]}"
else
integer offset=0
fi
((start_pos+=offset))
((end_pos=$start_pos+${#arg}))
fi
# Compute the new $proc_buf. We advance it
# (chop off characters from the beginning)
# beyond what end_pos points to, by skipping
# as many characters as end_pos was advanced.
#
# end_pos was advanced by $offset (via start_pos)
# and by $#arg. Note the `start_pos=$end_pos`
# below.
#
# As for the [,len]. We could use [,len-start_pos+offset]
# here, but to make it easier on eyes, we use len and
# rely on the fact that Zsh simply handles that. The
# length of proc_buf is len-start_pos+offset because
# we're chopping it to match current start_pos, so its
# length matches the previous value of start_pos.
#
# Why [,-1] is slower than [,length] isn't clear.
proc_buf="${proc_buf[offset + $#arg + 1,len]}"
# Handle the INTERACTIVE_COMMENTS option.
#
# We use the (Z+c+) flag so the entire comment is presented as one token in $arg.
if [[ -n ${interactive_comments+'set'} && $arg[1] == $histchars[3] ]]; then
if [[ $this_word == *(':regular:'|':start:')* ]]; then
style=comment
else
style=unknown-token # prematurely terminated
fi
-hsmw-add-highlight $start_pos $end_pos $style
already_added=1
continue
fi
# Analyse the current word.
if -hsmw-highlight-is-redirection $arg ; then
# A '<' or '>', possibly followed by a digit
in_redirection=2
fi
# Special-case the first word after 'sudo'.
if (( ! in_redirection )); then
if [[ $this_word == *':sudo_opt:'* ]] && [[ $arg != -* ]]; then
this_word=${this_word//:sudo_opt:/}
fi
fi
# Parse the sudo command line
if (( ! in_redirection )); then
if [[ $this_word == *':sudo_opt:'* ]]; then
case "$arg" in
# Flag that requires an argument
'-'[Cgprtu]) this_word=${this_word//:start:/};
next_word=':sudo_arg:';;
# This prevents misbehavior with sudo -u -otherargument
'-'*) this_word=${this_word//:start:/};
next_word+=':start:';
next_word+=':sudo_opt:';;
*) ;;
esac
elif [[ $this_word == *':sudo_arg:'* ]]; then
next_word+=':sudo_opt:'
next_word+=':start:'
fi
fi
# The Great Fork: is this a command word? Is this a non-command word?
if [[ $this_word == *':always:'* && $arg == 'always' ]]; then
# try-always construct
style=reserved-word # de facto a reserved word, although not de jure
next_word=':start:'
elif [[ $this_word == *':start:'* ]] && (( in_redirection == 0 )); then # $arg is the command word
if [[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg"} ]]; then
style=precommand
elif [[ "$arg" = "sudo" ]]; then
style=precommand
next_word=${next_word//:regular:/}
next_word+=':sudo_opt:'
next_word+=':start:'
else
-hsmw-highlight-expand-path $arg
local expanded_arg="$REPLY"
-hsmw-highlight-main-type ${expanded_arg}
local res="$REPLY"
() {
# Special-case: command word is '$foo', like that, without braces or anything.
#
# That's not entirely correct --- if the parameter's value happens to be a reserved
# word, the parameter expansion will be highlighted as a reserved word --- but that
# incorrectness is outweighed by the usability improvement of permitting the use of
# parameters that refer to commands, functions, and builtins.
local -a match mbegin mend
local MATCH; integer MBEGIN MEND
if [[ $res == none ]] && (( ${+parameters} )) &&
[[ ${arg[1]} == \$ ]] && [[ ${arg:1} = ([[:alpha:]_][[:alnum:]_]#|[[:digit:]]##) ]] &&
(( ${+parameters[${MATCH}]} ))
then
-hsmw-highlight-main-type ${(P)MATCH}
res=$REPLY
fi
}
case $res in
reserved) # reserved word
style=reserved-word
if [[ $arg == $'\x7b' ]]; then
braces_stack='Y'"$braces_stack"
elif [[ $arg == $'\x7d' ]]; then
# We're at command word, so no need to check $right_brace_is_recognised_everywhere
-hsmw-highlight-stack-pop 'Y' style=reserved-word
if [[ $style == reserved-word ]]; then
next_word+=':always:'
fi
fi
;;
'suffix alias') style=suffix-alias;;
alias) () {
integer insane_alias
case $arg in
# Issue #263: aliases with '=' on their LHS.
#
# There are three cases:
#
# - Unsupported, breaks 'alias -L' output, but invokable:
('='*) :;;
# - Unsupported, not invokable:
(*'='*) insane_alias=1;;
# - The common case:
(*) :;;
esac
if (( insane_alias )); then
style=unknown-token
else
style=alias
-hsmw-highlight-resolve-alias $arg
local alias_target="$REPLY"
[[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$alias_target"} && -z ${(M)__HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg"} ]] && __HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS+=($arg)
fi
}
;;
builtin) style=builtin;;
function) style=function;;
command) style=command;;
hashed) style=hashed-command;;
none) if -hsmw-highlight-check-assign; then
style=assign
if [[ $arg[-1] == '(' ]]; then
in_array_assignment=true
else
# assignment to a scalar parameter.
# (For array assignments, the command doesn't start until the ")" token.)
next_word+=':start:'
fi
elif [[ $arg[0,1] = $histchars[0,1] ]] && (( $#arg[0,2] == 2 )); then
style=history-expansion
elif [[ $arg[0,1] == $histchars[2,2] ]]; then
style=history-expansion
elif [[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]]; then
if [[ $this_word == *':regular:'* ]]; then
# This highlights empty commands (semicolon follows nothing) as an error.
# Zsh accepts them, though.
style=commandseparator
else
style=unknown-token
fi
elif (( in_redirection == 2 )); then
style=redirection
elif [[ $arg[1,2] == '((' ]]; then
# Arithmetic evaluation.
#
# Note: prior to zsh-5.1.1-52-g4bed2cf (workers/36669), the ${(z)...}
# splitter would only output the '((' token if the matching '))' had
# been typed. Therefore, under those versions of zsh, BUFFER="(( 42"
# would be highlighted as an error until the matching "))" are typed.
#
# We highlight just the opening parentheses, as a reserved word; this
# is how [[ ... ]] is highlighted, too.
style=reserved-word
-hsmw-add-highlight $start_pos $((start_pos + 2)) $style
already_added=1
if [[ $arg[-2,-1] == '))' ]]; then
-hsmw-add-highlight $((end_pos - 2)) $end_pos $style
already_added=1
fi
elif [[ $arg == '()' ]]; then
# anonymous function
style=reserved-word
elif [[ $arg == $'\x28' ]]; then
# subshell
style=reserved-word
braces_stack='R'"$braces_stack"
else
if -hsmw-highlight-check-path; then
style=$REPLY
else
style=unknown-token
fi
fi
;;
*) -hsmw-add-highlight $start_pos $end_pos commandtypefromthefuture-$res
already_added=1
;;
esac
fi
fi
if (( ! already_added )) && [[ $style == unknown-token ]] && # not handled by the 'command word' codepath
{ (( in_redirection )) || [[ $this_word == *':regular:'* ]] || [[ $this_word == *':sudo_opt:'* ]] || [[ $this_word == *':sudo_arg:'* ]] }
then # $arg is a non-command word
case $arg in
$'\x29') # subshell or end of array assignment
if $in_array_assignment; then
style=assign
in_array_assignment=false
next_word+=':start:'
else
-hsmw-highlight-stack-pop 'R' style=reserved-word
fi;;
$'\x28\x29') # possibly a function definition
if (( multi_func_def )) || false # TODO: or if the previous word was a command word
then
next_word+=':start:'
fi
style=reserved-word
;;
$'\x7d') # right brace
#
# Parsing rule: # {
#
# Additionally, `tt(})' is recognized in any position if neither the
# tt(IGNORE_BRACES) option nor the tt(IGNORE_CLOSE_BRACES) option is set."""
if $right_brace_is_recognised_everywhere; then
-hsmw-highlight-stack-pop 'Y' style=reserved-word
if [[ $style == reserved-word ]]; then
next_word+=':always:'
fi
else
# Fall through to the catchall case at the end.
fi
;|
'--'*) style=double-hyphen-option;;
'-'*) style=single-hyphen-option;;
"'"*) style=single-quoted-argument;;
'"'*) style=double-quoted-argument
-hsmw-add-highlight $start_pos $end_pos $style
-hsmw-highlight-string
already_added=1
;;
\$\'*) style=dollar-quoted-argument
-hsmw-add-highlight $start_pos $end_pos $style
-hsmw-highlight-dollar-string
already_added=1
;;
'`'*) style=back-quoted-argument;;
[*?]*|*[^\\][*?]*)
$highlight_glob && style=globbing || style=default;;
*) if false; then
elif [[ $arg = $'\x7d' ]] && $right_brace_is_recognised_everywhere; then
# was handled by the $'\x7d' case above
elif [[ $arg[0,1] = $histchars[0,1] ]] && (( $#arg[0,2] == 2 )); then
style=history-expansion
elif [[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]]; then
if [[ $this_word == *':regular:'* ]]; then
style=commandseparator
else
style=unknown-token
fi
elif (( in_redirection == 2 )); then
style=redirection
else
if -hsmw-highlight-check-path; then
style=$REPLY
else
style=default
fi
fi
;;
esac
fi
if ! (( already_added )); then
-hsmw-add-highlight $start_pos $end_pos $style
[[ $style == path || $style == path_prefix ]] && -hsmw-highlight-path-separators
fi
if [[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]]; then
if [[ $arg == ';' ]] && $in_array_assignment; then
# literal newline inside an array assignment
next_word=':regular:'
else
next_word=':start:'
highlight_glob=true
fi
elif
[[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_CONTROL_FLOW:#"$arg"} && $this_word == *':start:'* ]] ||
[[ -n ${(M)__HSMW_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg"} && $this_word == *':start:'* ]]; then
next_word=':start:'
elif [[ $arg == "repeat" && $this_word == *':start:'* ]]; then
# skip the repeat-count word
in_redirection=2
# The redirection mechanism assumes $this_word describes the word
# following the redirection. Make it so.
#
# That word can be a command word with shortloops (`repeat 2 ls`)
# or a command separator (`repeat 2; ls` or `repeat 2; do ls; done`).
#
# The repeat-count word will be handled like a redirection target.
this_word=':start::regular:'
fi
start_pos=$end_pos
if (( in_redirection == 0 )); then
# This is the default/common codepath.
this_word=$next_word
else
# Stall $this_word.
fi
done
}
# Check if $arg is variable assignment
-hsmw-highlight-check-assign()
{
setopt localoptions extended_glob
[[ $arg == [[:alpha:]_][[:alnum:]_]#(|\[*\])(|[+])=* ]] ||
[[ $arg == [0-9]##(|[+])=* ]]
}
-hsmw-highlight-path-separators()
{
local pos style_pathsep
style_pathsep=${style}_pathseparator
[[ -z "$HSMW_HIGHLIGHT_STYLES[$style_pathsep]" || "$HSMW_HIGHLIGHT_STYLES[$style]" == "$HSMW_HIGHLIGHT_STYLES[$style_pathsep]" ]] && return 0
for (( pos = start_pos; $pos <= end_pos; pos++ )) ; do
if [[ ${buf[pos]} == "/" ]]; then
-hsmw-add-highlight $((pos - 1)) $pos $style_pathsep
fi
done
}
# Check if $arg is a path.
# If yes, return 0 and in $REPLY the style to use.
# Else, return non-zero (and the contents of $REPLY is undefined).
-hsmw-highlight-check-path()
{
-hsmw-highlight-expand-path $arg;
local expanded_path="$REPLY"
REPLY=path
[[ -z $expanded_path ]] && return 1
[[ -L $expanded_path ]] && return 0
[[ -e $expanded_path ]] && return 0
# Search the path in CDPATH
local cdpath_dir
for cdpath_dir in $cdpath ; do
[[ -e "$cdpath_dir/$expanded_path" ]] && return 0
done
# If dirname($arg) doesn't exist, neither does $arg.
[[ ! -d ${expanded_path:h} ]] && return 1
# If this word ends the buffer, check if it's the prefix of a valid path.
if [[ ${buf[1]} != "-" && $pure_buf_len == $end_pos ]]; then
local -a tmp
tmp=( ${expanded_path}*(N) )
(( $#tmp > 0 )) && REPLY=path_prefix && return 0
fi
# It's not a path.
return 1
}
# Highlight special chars inside double-quoted strings
-hsmw-highlight-string()
{
setopt localoptions noksharrays
local -a match mbegin mend
local MATCH; integer MBEGIN MEND
local i j k style
# Starting quote is at 1, so start parsing at offset 2 in the string.
for (( i = 2 ; i < end_pos - start_pos ; i += 1 )) ; do
(( j = i + start_pos - 1 ))
(( k = j + 1 ))
case "$arg[$i]" in
'$' ) style=dollar-double-quoted-argument
# Look for an alphanumeric parameter name.
if [[ ${arg:$i} = ([[:alpha:]_][[:alnum:]_]#|[[:digit:]]##) ]] ; then
(( k += $#MATCH )) # highlight the parameter name
(( i += $#MATCH )) # skip past it
elif [[ ${arg:$i} = [{]([[:alpha:]_][[:alnum:]_]#|[[:digit:]]##)[}]* ]] ; then
(( k += $#MATCH )) # highlight the parameter name and braces
(( i += $#MATCH )) # skip past it
else
continue
fi
;;
"\\") style=back-double-quoted-argument
if [[ \\\`\"\$ == *$arg[$i+1]* ]]; then
(( k += 1 )) # Color following char too.
(( i += 1 )) # Skip parsing the escaped char.
else
continue
fi
;;
*) continue ;;
esac
-hsmw-add-highlight $j $k $style
done
}
# Highlight special chars inside dollar-quoted strings
-hsmw-highlight-dollar-string()
{
setopt localoptions noksharrays
local -a match mbegin mend
local MATCH; integer MBEGIN MEND
local i j k style
local AA
integer c
# Starting dollar-quote is at 1:2, so start parsing at offset 3 in the string.
for (( i = 3 ; i < end_pos - start_pos ; i += 1 )) ; do
(( j = i + start_pos - 1 ))
(( k = j + 1 ))
case "$arg[$i]" in
"\\") style=back-dollar-quoted-argument
for (( c = i + 1 ; c <= end_pos - start_pos ; c += 1 )); do
[[ "$arg[$c]" != ([0-9xXuUa-fA-F]) ]] && break
done
AA=$arg[$i+1,$c-1]
# Matching for HEX and OCT values like \0xA6, \xA6 or \012
if [[ "$AA" =~ "^(x|X)[0-9a-fA-F]{1,2}"
|| "$AA" =~ "^[0-7]{1,3}"
|| "$AA" =~ "^u[0-9a-fA-F]{1,4}"
|| "$AA" =~ "^U[0-9a-fA-F]{1,8}"
]]; then
(( k += $#MATCH ))
(( i += $#MATCH ))
else
if (( $#arg > $i+1 )) && [[ $arg[$i+1] == [xXuU] ]]; then
# \x not followed by hex digits is probably an error
style=unknown-token
fi
(( k += 1 )) # Color following char too.
(( i += 1 )) # Skip parsing the escaped char.
fi
;;
*) continue ;;
esac
-hsmw-add-highlight $j $k $style
done
}
# Called with a single positional argument.
# Perform filename expansion (tilde expansion) on the argument and set $REPLY to the expanded value.
# Does not perform filename generation (globbing).
-hsmw-highlight-expand-path()
{
(( $# == 1 )) || print -r -- >&2 "hsmw-highlight: BUG: -hsmw-highlight-expand-path: called without argument"
# The $~1 syntax normally performs filename generation, but not when it's on the right-hand side of ${x:=y}.
setopt localoptions nonomatch
unset REPLY
: ${REPLY:=${(Q)~1}}
}
# -------------------------------------------------------------------------------------------------
# Main highlighter initialization
# -------------------------------------------------------------------------------------------------
-hsmw-highlight-init() {
__hsmw_highlight_main__command_type_cache=()
}
-hsmw-add-highlight()
{
local -i start end
local highlight
start=$1
end=$2
shift 2
for highlight; do
if (( $+HSMW_HIGHLIGHT_STYLES[$highlight] )); then
reply+=("$start $end $HSMW_HIGHLIGHT_STYLES[$highlight]")
break
fi
done
}
__HSMW_MH_SOURCED=1
# vim:ft=zsh